The BEC RidgeWave® AC867 5GHz Subscriber Unit offers client-side (subscriber) support for BEC’s RidgeWave® 4700FWB Base Station. The BEC AC867 is a high-performance 5Ghz 802.11ac Wave 2 subscriber unit optimized for long-range, high-bandwidth, secure and reliable fixed wireless connectivity. Designed for outdoor deployments, the BEC AC867 withstands conditions including prolonged exposure to sunlight, snow, rainfall, hail, and humidity yet it’s aesthetically pleasing and suitable for indoor use.

Maximum Wireless Performance

• Superfast 802.11ac Wave 2 MU-MIMO technology offers a wireless data rate of up to 867 Mbps on 5 GHz.

Multi-user MIMO (MU-MIMO)

• Receives up to 2 data streams simultaneously for improved device throughput

High-Gain Antenna

• Embedded high-gain 19 dBi  dual-polarized directional antenna for extended range

Transmit Beamforming (TxBF) 

• Optimizes signal and reception enabling improved performance and best performance in high noise environments.

Flexible Deployment 

• Supports fixed wireless point-to-multi-point (PTMP) implementations for WISPs of point-to-point (PTP) links

Power over Ethernet (PoE)

• Both power and data are carried over a single Ethernet cable with
• the included PoE injector or connect to a IEEE 802.3at PoE switch

Radio

• Wireless Standard (IEEE) : 802.11a/n/ac (5GHz-Only)
  802.11ac/a/g/n: OFDM
  802.11n/ac: 2×2 MIMO with 2 streams
  802.11ac channel bandwidth 20/40/80 MHz
  802.11n channel bandwidth 20/40 MHz
  802.11n/ac packet aggregation: AMPDU, ASPDU
• Frequency
  5150MHz – 5250MHz
  5250MHz – 5350MHz
  5470HMz – 5725MHz
  5725MHz – 5850MHz
  (Operation frequency may vary on the figured regulatory domain)
• Modulation
  802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
  802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Max. Phy Data Rate up to 867Mbps
• Max. Output Power: 23dBm
• Support Tx Beamforming (TxBF)

Antenna

• Frequency Range: 5150-5925MHz
• Directional High Gain Antenna
• Gain: 19dBi

Security & Features

• Operating Modes
  Access Point (AP)
  Client Bridge
  WDS (WDS AP / WDS Bridge / WDS Station)
• Security
  WEP 64/128/152 bit
  WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
• Hide SSID in beacons
• MAC address filtering, up to 32 MACs per SSID
• Wireless STA (Client) connection list
• Multicast Support
• Auto Channel Selection
• Support BSSID
• Multiple SSIDs up to 16
• Wireless MAC Filtering
• Wireless Guest Isolation/Network
• Wireless Scheduler

Network Protocols

• Support IPv4, IPv6
• Spanning Tree Protocol

Management

• Web-based GUI Management
• VLAN Tag / VLAN Pass-Through
• RADIUS Accounting
• Support SNMP v1 / v2 / v3
• Support MIB I/II, Private MIB
• Email Alert
• HTTS
• SSLTunnel
• CLI
• Save Configuration as Default

Quality of Service Control

• Compliant with IEEE 802.1e Standard
• Bandwidth Management

Interface

• (2) 10/100/1000Mbps Gigabit Ethernet
  LAN/PoE
  LAN
• Reset Button
• LED Indicators
• Power
  LAN 1
  LAN 2
  WLAN
  WLAN LED (Weak, Medium, Strong)

Power & Protections

• Proprietary 24V PoE Injector
• Max Power Consumption: 7W
• Surge Protection
  Line to Line: 1KV
  Line to Ground: 2KV
• ESD Protection: Contact: ±4KV / Air: ±8KV

Enclosure (Device only)

• Dimensions: 7.5″ (D) x 1.5″ (H) (190mm x 38 mm)
• Weight: 1.11lbs. (460g)
• IP55 Protected Enclosure

Environment

• Operating: -20° ~ 60°C (-4°~140°F)
• Storage: -30° ~ 80°C (-22°~176°F)

  Datasheet

  Quick Start Guide