M150 Series
Advanced LTE Industrial Router
The M150 Series of Advanced LTE Industrial Routers are high-performance wireless communication platforms that deliver secure, reliable, real-time 4G cellular data connectivity for a wide range of M2M and IoT applications. Choose between two models: one with LTE Category 6, ideal for moderate to high-bandwidth needs, and another supporting CAT M1 and NB-IoT for low-power wide area network (LPWAN) applications.
Both models are cost-effective platforms with a compact form factor, equipped with dual Gigabit Ethernet ports, GPS, an RS-232/RS-485 serial interface, and advanced capabilities, providing seamless drop-in seamless drop-in connectivity for any network setup.
Ideal applications:
- M2M/IoT
- SCADA Networks
- Remote Monitoring
- Metering Applications
- Industrial Automation & Control
- Smart Agriculture
- Out-of-band Management (OOBM)
- ATMs/Kiosks/Digital Signage
- DUAL-WAN Interfaces 4G/LTE (WWAN) and Ethernet WAN (EWAN) ensuring high availability, network resilience, and automatic failover
- Lower Total Cost of Ownership (TCO) – (M150-NB) Cost-effective hardware for use with low cost data plans optimized for low-bandwidth IoT applications
- Improved Coverage – (M150-NB) Extend cellular connectivity deep into building basements, remote rural areas or network fringe.
- DB-9 Serial RS-232/RS-485 Interface Enabling serial device connectivity over IP and Out-of-Band Management (OOBM)
- Active GPS Enable real-time tracking for location-based services or data export in NMEA format
- Ultra-Compact Fits in the palm of your hand, simplifying deployments & discrete mounting virtually anywhere
- Rugged/Hardened IP30 rated with industrial-grade components with extended temperature range and flexible input voltage selection
M150 – Advanced LTE Industrial Router
Supported Frequency Bands
- LTE Bands: 1, 3, 5, 7, 8, 20, 28, 32, 38, 40, 41
- Maximum Data Rates: Up to 300 Mbps DL & Up to 50 Mbps UL
- Channel Bandwidth: 1.4, 3, 5, 10, 15, 20 MHz
- Transmit Output Power: 23dBm
- LTE Antenna: 2×2 MIMO
M150-NB – Advanced eMTC (Cat M1)/ NB-IoT Industrial Router
Supported Frequency Bands
- LTE Bands: 1, 2, 3, 4, 5, 8, 12, 13, 18, 19, 20, 26, 28, 39 (Cat M1 only)
- Maximum Data Rates:
eMTC (Cat M1): 375Kbps (DL), Max. 375Kbps (UL)
NB: 32Kbps (DL), Max. 70Kbps (UL) - Channel Bandwidth: eMTC: 1.4 MHz | NB-IOT: 200 KHz
- Transmit Output Power: 23dBm
- LTE Antenna: 1×1 SISO
- Dual-WAN ports (4G LTE & Ethernet WAN)
- Load balancing – Maximizing bandwidth of outbound traffic
- Automatic failover and fallback
- IPv4, IPv6, IPv4 / IPv6 dual-stack
- IP Tunnel IPv6 in IPv4 (6RD)
- IP Tunnel IPv4 in IPv6 (DS-Lite)
- Dual APN
- Keep Alive
- IP Pass-Through
- NAT, static routing and RIP-1/2
- Universal Plug and Play (UPnP) compliant
- Dynamic Domain Name System (DDNS)
- Virtual server and DMZ
- SNTP and DNS relay
- Supports DHCP server/client/relay
- IPSec VPN Tunneling (up to 8 tunnels)
- PPTP VPN Tunneling (up to 4 dial-in/dial-out tunnels)
- L2TP over IPSec VPN Tunneling (up to 4 dial-in / dial-out tunnels)
- GRE (up to 8 tunnels)
- Embedded PPTP / L2TP / IPSec Client and Server
- IKE Key Management
- MPPE Encryption for PPTP
- IPsec DES, 3DES, and AES encryption
- OpenVPN: 1 server up to 4 clients
- Open Shortest Path First (OSPF)
- Border Gateway Protocol (BGP)
- IEEE 802.1Q VLAN
- Outbound Load Balancing (Round Robin, Weight, or IP Hash)
- Built-in NAT Firewall
- Stateful Packet Inspection (SPI)
- Prevents DoS attacks including Land Attack, Ping of Death, etc.
- Access Control
- IP Filtering, MAC Filtering, URL Filtering
- Password protection for system management
- VPN Passthrough
- RS-232 / RS-485
- Out-of-Band Management (OOBM)
- Support Modbus/TCP, Telnet Server, SSH Server, UDP Server/Client, TCP Server/Client
- Embedded multi-GNSS engine for GPS or GLONASS system
- Quick Installation Wizard
- Web-based GUI for remote and local management
- Firmware upgrade and configuration data upload and download via web-based GUI
- TR-069 supports remote management
- Support SNMP
- Syslog monitoring
- BECentral® CloudEdge Remote Management
Physical Interfaces
- M150: Two (2) SMA Female LTE Antenna Connectors
- M150-NB: Single Female LTE Antenna Connector
- GPS: Single SMA Female Connector
- Ethernet LAN: 2-port 10/100/1000Mbps auto-crossover (MDI/ MDI-X) switch
- WAN: 4G LTE and ETH WAN
- Serial Port (DB-9 Female)
- SIM Card: Single slot (2FF Size)
- Reset Button
- Power Connector: 2-pin connector
- LED Indicators: Power, Internet, LTE, Ethernet
- Input: DC 9V~56V
- Dimensions: 4.29 x 3.3 x 1.1 in (109.3 x 85.7 x 28.9 mm)
- Operating temperature: -40 to 140º F (–40 to 60º C)
- Humidity: 20 ~ 95% non-condensing