RPS-1000 Series
Remote Power Switch with Intelligent Control
The BEC PowerGuard® RPS-1000 is a compact, cellular-enabled remote power switch designed to help businesses restore unresponsive equipment without dispatching a technician. With embedded LTE Cat M1/NB-IoT connectivity, the RPS-1000 provides out-of-band power control to restore operation with a simple power cycle, anytime, from anywhere.
Purpose-built for unattended and hard-to-reach deployments, the RPS-1000 enables remote power cycling, scheduled reboot, power loss alerting, and centralized management through BECentral® CloudEdge. It helps organizations reduce downtime, avoid unnecessary truck rolls, and maintain service continuity for critical edge equipment.
The RPS-1000 is ideal for ATMs, kiosks, digital signage, field cabinets, security equipment, routers, gateways, and other remote devices that may require a hard reboot when local network access is unavailable.
Stay Powered, Stay Connected
- Remote power control from anywhere
- Restore unresponsive equipment without local access
- Reduce truck rolls and service calls
- Schedule reboots to improve uptime
- Receive power loss alerts with dying gasp notification
- Designed for deep indoor and challenging coverage locations
Ideal Applications
- ATMs
- Kiosks
- Digital signage
- Field cabinets
- Security cameras and access equipment
- Routers, gateways, and modems
- Telecom and utility edge equipment
- Remote and unattended sites
- True Out-of-Band Power Control
Embedded LTE Cat M1/NB-IoT connectivity keeps the RPS-1000 reachable independently of the connected device or local network, enabling remote recovery when equipment becomes unresponsive. - Remote Power Cycle and Hard Reboot
Remotely power cycle connected equipment to restore service without sending a technician to the site. - Scheduled Reboot Support
Configure scheduled reboots to proactively refresh connected devices, reduce lockups, and support better uptime for unattended deployments. - Power Loss Alerting with Dying Gasp
The RPS-1000 can send a final notification upon power loss, helping teams identify site power issues faster and improve response coordination. - BECentral® CloudEdge Management
Centralized cloud management provides remote visibility and control across distributed deployments, simplifying operations for multiple sites and assets. - LTE-M/NB-IoT Coverage Efficiency
LTE Cat M1 and NB-IoT support enables reliable low-bandwidth connectivity for deep indoor, cabinet, and challenging coverage environments. - Integrated GNSS
Integrated GNSS provides location visibility and asset accountability for distributed equipment deployments. - Compact, Plug-and-Play Design
The RPS-1000 is compact and easy to deploy, with AC input/output support for simple installation in kiosks, cabinets, branch locations, and remote sites.
Cellular Connectivity
- LTE Cat M1 / NB-IoT
- 3GPP LTE Release 13/14 Cat M1, NB1, NB2 compliant
- LTE Cat M1: 1.1 Mbps DL / 0.3 Mbps UL
- LTE Cat NB1: 62.5 kbps DL / 27.2 kbps UL
- LTE Cat NB2: 160 kbps DL / 120.7 kbps UL
- Supported bands: B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66, B85, B106
SIM/eSIM
- One 4FF Nano SIM slot
- SGP.32 eSIM option
GNSS
- Embedded GNSS engine for GPS
- Supports location visibility and tracking
Power Control
- Remote power cycle and hard reboot
- Scheduled reboot support
- Dying gasp alert upon power loss
- Out-of-band power management
- Restore connected devices without local network access
Hardware Specifications
- LTE antenna: One SMA female connector
- GNSS antenna: One SMA female connector
- Console: One USB Type-A
- Power input: 90VAC to 240VAC
- Maximum load: 15A
- Power consumption: Max. 1.8W
- AC OUT: NEMA 5-15R, controlled device receptacle
- AC IN: NEMA 5-15P, wall plug
- Dimensions: 120 x 70 x 48 mm
- Operating temperature: -40°C to 70°C
- IP rating: IP40
Management
- BECentral® CloudEdge Management