RidgeWave® 7000 R26
MaxRange Gigabit LTE Outdoor Router
The RidgeWave® by BEC 7000 R26 MaxRange Gigabit LTE Outdoor router adapts LTE Category 18 technology capable of delivering peak data rates of 1.2 Gbps downlink and 150 Mbps uplink, making it the fastest commercially available outdoor LTE router today.
Operators seeking to accelerate and simplify the deployment of new applications and services over public carrier networks or private networks across licensed spectrum assets, shared spectrum (CBRS) need to look no further. Purpose-built for reliability, the 7000R26 incorporates a ruggedized enclosure, industrial-grade components built to handle extreme temperatures, moisture, and dust for mission-critical connectivity in the harshest environments. Performance is no exception with Gigabit Ethernet Interface, PoE (Power over Ethernet), and high-gain 4X4 MIMO antenna technology for increased capacity, higher throughput, and extended coverage.
It’s designed for applications and use cases,
- Oilfield, mining, construction job site connectivity
- Backhaul for community Wifi hotspot
- Utility distribution automation
- Public Safety video surveillance
- Primary or secondary broadband for offices, factories & campuses.
- Temporary / Rapid network deployment
- Ultra High Speed
Gigabit LTE CAT 18 with carrier aggregation up to 5CA DL/2CA UL delivering data rates of 1.2Gbps downlink and 150Mbps uplink - Multi-Element Adaptive Antenna
4×4 MIMO Patented Dual-Pol Dual-Slant antenna technology ensures faster and efficient bi-directional transmission - Built to Last
IP-68/UL-50E Enclosure, complete protection against dust and water ingress - Ventilation
GORE® Vent for pressure equalization, humidity, and airflow - Wind Tunnel Tested
Successful Operation up to 132mph (F2 Tornado 113-157mph) - Surge /Lightning Protection
IEC 6100-4-2 (ESD) and IEC 61000-4-5 (Lighting) - Extended Temperature Range
-40°F to 140°F (-40°C to 60°C) - PoE Powered
Gigabit LAN Interface with IEEE 802.3at (PoE+) complaint - Corrosion Protection
SurTec treated Die-cast alloy - Form Factor
Under 5lbs, easily mount onto lightweight poles or exterior walls - Complete Kit
Packaged with Gigabit PoE Injector, mounting bracket, Flooded CAT5e, and ground wire
Network Certification: AT&T, T-Mobile (PTCRB), Verizon, US Celluar, and FCC Part 96 CBRS EUD
Supported Frequency Band:
- Comply 3GPP Rel.12 with Carrier Aggregation (5CA DL & 2CA UL)
- 4G/LTE: FDD/TDD (Cat.18)
Band 1, 2(25), 3, 4(66), 5(26), 7, 8, 12(17), 13, 14, 20, 28, 29, 30, 32, 38, 39, 40, 41, 42, 46(LAA), 48, 71 - 3G/WCDMA: B1, B2, B4, B5, B8
- Channel Bandwidth
1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz & 20MHz - RF Characteristics
Maximum Transmit Power: 23 ± 2dBm
Modulation: 256QAM DL / 64QAM UL - LTE Antenna
4×4 DL MIMO Directional (Dual Polarization & Dual Slant)
Max. Peak Gain: 9dBi
Quality of Service Control
- Supports the DiServ approach
- Traffic prioritization based on protocol, port number, and IP address
Network Protocols and Features
- NAT, static routing and RIP-1/2
- NAT supports PAT and multimedia applications
- Virtual server and DMZ
- SNTP, DNS relay and DDNS
- IGMP snooping and IGMP proxy
Operational Modes
- Router or Bridge
Management
- Quick Installation Wizard
- Web-based GUI for remote and local management
- Firmware upgrade and configuration data upload & download via web-based GUI or BECentral®
- DHCP server/client/relay
- TR-069 supports remote management
- BECentral® Cloud Management
- SNMP and Syslog monitoring
Physical Interface
- Gigabit LAN Interface with IEEE 802.3at compliant PoE P.D (25.5W)
- SIM Card Slot: One (1), Mini-SIM (2FF)
- LED Indicators: Power, LAN(PoE), LTE Signal Strength, and Internet
Operating Environment
- Operating temperature: -40°C to 60°C (-40°F to 140°F)
Surge/ESD Protection
- Surge Protection: K.21 enhanced mode 6KV
- ESD Protection: Contact: ± 8KV / Air: ±15KV