RidgeWave® 6900R21

RidgeWave® 6900R21

LTE-A Pro CBRS Outdoor Router

BEC RidgeWave® 6900R21 front

The RidgeWave® BEC 6900R21 is a High-Power LTE CAT B CPE-CBSD delivering robust connectivity for CBRS B48 commercial deployments. The 6900R21 is an LTE CAT 12 UE supporting carrier aggregation up to 3 CA DL / 2CA uplink, with a high gain 15dBi 4X4 MIMO directional antenna. CBRS  deployments with the 6900R21 will experience increased capacity, higher throughput, and extended coverage. Unique to BEC devices are GORE® Vents for pressure equalization, humidity, and airflow, this accompanied with lighting/ESD Protection and the IP68/UL 50E enclosure ensure protection against dirt, harmful ingress of water, humidity and extreme temperatures for years of dependable operation.

The RidgeWave® BEC 6900R21 integrates seamlessly with BECentral®, BEC’s proven cloud-based remote management as a complete solution for managing large-scale UE deployments. Administrators can remotely provision, monitor, upgrade, and troubleshoot devices from a single centralized location in real-time. For CAF II or other ETC support recipients, BECentral fully supports scheduling, testing, report generation, and submission for FCC Performance Measures.

It’s designed for applications,

  • Fixed Wireless Last Mile Access
  • Mission Critical
  • Industrial
  • Oil and Gas
  • Mining
  • Marine
  • Frequency Bands: 42, 43 and 48
  • Category 12 UE with LTE TDD downlink rates up to 430Mbps (DL
  • BEC Dual-Pol Dual-Slant Adaptive Antenna Technology
  • Flexible Network Modes Supporting Bridge, Router and Advanced networking
  • Gigabit LAN Interface with IEEE 802.3 at complaint PoE P.D
  • Extended temperature range between -40°C to 60°C
  • IP68 / UL 50E SurTec Treated Die-Cast Alloy Enclosure for harsh weather conditions
  • Lightweight, Compact, and unobtrusive design
  • Precise alignment achievable with multi-angle, multi-position mounting brackets
  • Power over Ethernet (PoE) for flexible location installation and power
  • BECentral® BEC’s Cloud-Based device management for extending network visibility and control of devices remotely

Network Certification: FCC Part 96 Authorized CAT B CPE-CBSD

Supported Frequency Bands

  • Comply 3GPP Rel.12 with Carrier Aggregation
  • 4G/LTE: TDD (Cat.12)
    B42 (3400MHz ~ 3600MHz)
    B43 (3600MHz ~ 3800MHz)
    B48 (3550MHz ~ 3700MHz)
  • Downlink speeds up to 430Mbps
  • Uplink speeds up to 20Mbps
  • Carrier Aggregation: Yes, up to 3 carriers (DL) and 2 carriers (UL)
    DL 2 x CA: 42 + 42, 48 + 48
    DL 3 x CA: 42 + 42 + 42, 48 + 48 + 48
    UL 2 x CA: 42 + 42
  • LTE Bandwidth: 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz & 20MHz
  • Modulation: 256QAM DL / 64QAM UL
  • Maximum Transmit Power 23±2dBm
  • LTE Antenna
    MIMO Directional (Dual Polarization)
    4×4 MIMO DL
    Gain: 15dBi ± 1dBi
    CPE-CBSD Category B

Operational Modes

  • Bridge or Routed

Network Protocols and Features

  • NAT, static routing and RIP-1/2
  • NAT supports PAT and multimedia applications
  • Virtual server and DMZ
  • SNTP, DNS relay and DDNS
  • IGMP snooping and IGMP proxy
  • Supports DHCP server/client/relay

Quality of Service Control

  • Supports the DiServ approach
  • Traffic prioritization based-on protocol, port number, and IP address

Firewall

  • Built-in NAT Firewall
  • Stateful Packet Inspection (SPI)
  • Prevents DoS attacks including Land Attack, Ping of Death, etc.
  • Access Control
  • IP Filtering, MAC Filtering, URL Filtering
  • Password protection for system management
  • VPN pass-through

Management

  • Web-based GUI for remote and local management
  • Firmware upgrade &conguration data upload and download via web-based GUI
  • BECentral® Cloud Management
  • Syslog monitoring

Physical Interface

  • Gigabit LAN Interface with IEEE 802.3at compliant PoE P.D
  • SIM: One (1) slot 2FF Size
  • GPS (6900R21-G Only)
  • LED Indicators: Power, LAN(PoE), LTE, and Internet

Physical Specifications

  • Dimensions: 12.6″ (W) x 12.6″ (H) x 2.91″ (D) (320mm x 320 mm x 74mm)
  • Weight: < 1.5kg
  • IP-68 Grade Enclosure

Power Specifications

  • Input: PoE-PD (802.3at PD complaint (25.5W))

Operating Requirements

  • Operating temperature: -40° C to 60° C (-40° F to 140° F)

thank you for expressing your interest!

Distributors and Resellers

Our partners will be able to address and resolve inquiries relating to basic networking and configuration, and can advise you on the products and services that best fit your needs.

Request A Quote

Fill out the form below, our sales representative will get back to you expeditiously!