RidgeWave® 6900R21
LTE-A Pro CBRS Outdoor Router
The RidgeWave® BEC 6900R21 is a High-Power LTE CAT B CPE-CBSD delivering robust connectivity for CBRS B48 commercial deployments. The 6900R21 is an LTE CAT 12 UE supporting carrier aggregation up to 3 CA DL / 2CA uplink, with a high gain 15dBi 4X4 MIMO directional antenna. CBRS deployments with the 6900R21 will experience increased capacity, higher throughput, and extended coverage. Unique to BEC devices are GORE® Vents for pressure equalization, humidity, and airflow, this accompanied with lighting/ESD Protection and the IP68/UL 50E enclosure ensure protection against dirt, harmful ingress of water, humidity and extreme temperatures for years of dependable operation.
The RidgeWave® BEC 6900R21 integrates seamlessly with BECentral®, BEC’s proven cloud-based remote management as a complete solution for managing large-scale UE deployments. Administrators can remotely provision, monitor, upgrade, and troubleshoot devices from a single centralized location in real-time. For CAF II or other ETC support recipients, BECentral® fully supports scheduling, testing, report generation, and submission for FCC Performance Measures.
It’s designed for applications,
- Fixed Wireless Last Mile Access
- Mission Critical
- Industrial
- Oil and Gas
- Mining
- Marine
- Frequency Bands: 48
- LTE Category 12 UE
- Data Rates of 430Mbps and 20Mbps UL (TDD Config. 2, SSF: 7)
- BEC Dual-Pol Dual-Slant Adaptive Antenna Technology
- Flexible Network Modes Supporting Bridge, Router and Advanced networking
- Gigabit LAN Interface with IEEE 802.3 at complaint PoE P.D
- Extended temperature range between -40°C to 60°C
- IP68 / UL 50E SurTec Treated Die-Cast Alloy Enclosure for harsh weather conditions
- Lightweight, Compact, and unobtrusive design
- Precise alignment achievable with multi-angle, multi-position mounting brackets
- Power over Ethernet (PoE) for flexible location installation and power
- BECentral® BEC’s Cloud-Based device management for extending network visibility and control of devices remotely
Network Certification: FCC Part 96 Authorized CAT B CPE-CBSD, OnGo
Supported Frequency Bands
- Comply 3GPP Rel.12 with Carrier Aggregation
- 4G/LTE: TDD (Cat.12)
B48 (3550MHz ~ 3700MHz) - Data Rates of 430Mbps and 20Mbps UL (TDD Config. 2, SSF: 7)
- Carrier Aggregation: 3CA DL/2CA UL
- LTE Bandwidth: 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz & 20MHz
- Modulation: 256QAM DL / 64QAM UL
- Maximum Transmit Power: 38dBm EIRP
- LTE Antenna
MIMO Directional (Dual Polarization)
4×4 MIMO DL
Gain: 15.5dBi ± 1dBi
CPE-CBSD Category B
Operational Modes
- Bridge or Routed
Network Protocols and Features
- NAT, static routing and RIP-1/2
- NAT supports PAT and multimedia applications
- Virtual server and DMZ
- SNTP, DNS relay and DDNS
- IGMP snooping and IGMP proxy
- Supports DHCP server/client/relay
Quality of Service Control
- Supports the DiffServ approach
- Traffic prioritization based-on protocol, port number, and IP address
Firewall
- Built-in NAT Firewall
- Stateful Packet Inspection (SPI)
- Prevents DoS attacks including Land Attack, Ping of Death, etc.
- Access Control
- IP Filtering, MAC Filtering, URL Filtering
- Password protection for system management
- VPN pass-through
Management
- Web-based GUI for remote and local management
- Firmware upgrade & configuration data upload and download via web-based GUI
- BECentral® Cloud Management
- Syslog monitoring
Physical Interface
- Gigabit LAN Interface with IEEE 802.3at compliant PoE P.D
- SIM: One (1) slot 2FF Size
- GPS (6900R21-G Only)
- LED Indicators: Power, LAN(PoE), LTE, and Internet
Physical Specifications
- Dimensions: 12.6″ (W) x 12.6″ (H) x 2.91″ (D) (320mm x 320 mm x 74mm)
- Weight: < 1.5kg
- IP-68 Grade Enclosure
Power Specifications
- Input: PoE-PD (802.3at PD complaint (25.5W))
Operating Requirements
- Operating temperature: -40°C to 70°C (-40°F to 158°F)